You're on Utah Lake — which is the most demanding water in the state for a hull. Shallow, warm, heavy with minerals and sediment, and prone to algae blooms most summers. We come to you and deal with what it leaves behind.
Jordanelle and Deer Creek are cold, deep, and relatively clean. Utah Lake is the opposite — shallow enough to warm up fast, stirred constantly so there's sediment in suspension, and carrying serious mineral load. It's a great lake to live on and a hard one on gelcoat.
Three things show up on nearly every Saratoga Springs boat we look at: a stained band right at the waterline, hard-water spotting across the hull sides, and a chalky feel to gelcoat that should still be glossy.
Algae and mineral scum leave a band along the hull that regular soap will not remove. It needs proper decontamination, and if it's been there a season, correction.
Suspended silt settles onto the hull and dries into a dull haze. Wiping it dry drags grit across gelcoat and puts fine scratches in the finish.
Living this close means short evening runs, several times a week. Great for you. It also means the hull never really gets dry and clean between outings.
Exterior wash, decontamination, machine-applied wax. About $357 on a 21-footer.
Adds interior, vinyl, compartments, and trailer. Roughly $462 on a 21-footer.
Full exterior. Keeps minerals and algae from bonding in the first place — which on this lake is most of the battle.
Yacht Armor™ marine film runs 5–7 years and doesn't let hard water or algae bond to the surface. Transom coverage from $900 — and the transom is exactly where Utah Lake leaves its worst staining. We're the state's only certified installer.
Usually. If it's surface deposit, decontamination lifts it. If it's been through a full season and etched into the gelcoat, that's correction work — machine polishing, sometimes wet sanding — and we quote it after seeing the boat. We'll tell you honestly which one you're looking at.
It helps more than most things, and it's why your boat is probably in better shape than your neighbor's. But rinsing with hard water still leaves minerals behind as it dries. Rinsing plus a protective layer is what actually holds the finish.
Either. We bring our own water and power, so wherever the boat sits works.
Make, model, and length. We'll give you a number and come to you.